Booth Table

Length: 47.2″ (120 cm)
Width: 27.6″ (70 cm)
Height options:
 • Bar height: 43.3″ (110 cm)
 • Table height: 29.5″ (75 cm)

Weight: 44.1 lbs (20kg)

Material: aluminum

Notes: The table comes with two height options to fit your space.

What is the Booth Table?

The Booth Table is a wall-mounted café and restaurant table that can be installed at either sitting or standing height. It measures 47.2″ (120 cm) long by 27.6″ (70 cm) wide, weighs 44.1 lbs (20 kg), and is made from aluminum for indoor or outdoor use. Because it mounts to the wall with a single support pole, it frees up the floor space a four-legged table would occupy.

What else is the Booth Table called?

The Booth Table is also known as a bar leaner, bar table, diner table, restaurant table, bistro table, or outdoor table. At standing height it functions as a bar leaner; at table height it works as a dining or booth table.

What height is the Booth Table?

Two heights are available: bar height at 43.3″ (110 cm) for standing use, or table height at 29.5″ (75 cm) for seated dining. You choose the height at installation. Since the table is required to be drilled into the wall, it isn't able to be easily moved.

How is the Booth Table installed?

The Booth Table mounts to the wall and is supported by a single pole to the floor. It can be installed with a drill, and all screws and fixings are included along with instructions. The fixings need to go into solid timber in the wall, so we recommend an experienced builder handle the installation to make sure the mount is secure.

Can the Booth Table be installed on brick or concrete?

Yes. The Booth Table can be mounted to brick, concrete or masonry, but you'll need to source the appropriate masonry screws and plugs yourself — the screws supplied are for timber. Your installer will be able to specify the right fixings for your wall type.

Can the Booth Table be used outdoors?

Yes. The Booth Table is made from aluminum, so it won't rust and is suitable for outdoor terraces, courtyards and patios as well as indoor cafés, pubs and restaurants.

How much space does a full booth setup need?

A full booth uses two Booth Seats facing each other with a Booth Table centred between them. Allow 47.2″ (120 cm) wide × 62.9″ (160 cm) deep, measured out from the wall.

The depth comes from two seats at 19.7″ (50 cm) each plus the 27.6″ (70 cm) table, less a 2″ (5 cm) overlap where the table sits over each seat's front edge. That leaves roughly 23.6″ (60 cm) of clear space between the seat fronts — enough legroom for two people opposite each other with comfortable reach across the table.

How many people does the Booth Table seat?

Four people can comfortably sit at the Booth Table, two on either side.

How do you clean around the Booth Table?

Wipe the surface with a dry cloth for everyday care, or warm soapy water and a soft cloth for spills, drying thoroughly afterwards. Because the table is wall-mounted with a single support pole, there are no table legs to clean around — you can sweep, vacuum and mop underneath in one pass, which matters in a venue cleaning down every night.

What furniture pairs well with the Booth Table?

The Booth Table is designed to pair with our Booth Seat, either as a single bench or as two facing seats for a full booth. If you're after a slightly smaller cafe table, we have our Wall Mounted Cafe Table.